BEAUTI-TONE 3.78L Acrylic Textured Primer

Floor and wall coating
Apply Textured Primer to achieve an optimum working surface prior to application of your Beauti-Tone spreadable stone coatings
Textured Primer has a very thick consistency - for additional workability two or three tablespoons of water per litre may be added
Textured Primer may be tinted (recommended)
Sometimes this is desired if you are going to use a grout pattern in your installation
Coverage: approximately 168 sq. ft.
Drying time: approximately 1 hour
Applicator: small roller or paint brush

SURFACE PREPARATION:

INTERIOR CONCRETE:

EXTERIOR CONCRETE:

Surface should be level and in good condition
Repairs should be made prior to the application of the Textured Primer
Option #1: etch with 1:1 solution of muratic acid and water, then scrub with a stiff deck brush and a strong TSP solution and rinse completely
Option #2: power wash surface - using unit with at least 2400 PSI pressure - holding nozzle about 3" from surface

NEW CONCRETE:

NEW MASONRY:

WOOD:

Surface must be clean and in good condition, free of dust, dirt, surface sealers and any other contaminants which may block adhesion

PLYWOOD FLOORS:

Must be at least 1/2" thickness
For best results tongue and groove wood is the best - it minimizes movement between sheets and fastened solidly to floor joist
Beauti-Tone spreadable stone coatings are highly flexible but it is still best to ensure precautions are taken
For additional security - apply a mesh and scratch coat to the wood surface prior to applying Beauti-Tone spreadable stone coatings
Can be tinted
Acts like a clear base